Weber mt CR 8 - Maintenance Operations Details; Changing Engine Oil Filter

28
1
2
3
2
3
Remove the cover cap (2) from the oil drain valve
Screw the oil drain hose (3) onto the oil drain valve.
CAUTION! Danger of scalding due to hot oil.
Wear protective gloves.
Use extra caution.
Allow the oil to drain into the collection vessel.
Unscrew the oil drain pipe.
Attach the cover cap to the oil drain valve.
Fill fresh oil into the engine in accordance with
the specication.
Check the oil level and top o󰀨 to the “max.” mark.
Insert the oil dip stick.
Close the maintenance cover along with the side cover.
8.2.5. Change the engine
oil lter
CAUTION
Danger of burn injuries at the hot engine and its attachments.
Allow the combustion engine to cool down su󰀩ciently
before starting work.
Use extra caution during work on the engine when it is
at operating temperature.
Drain the engine oil.
Unscrew the screw plug (1).
Carefully clean the sieve insert of the screw plug
Remove the old oil lter. Dispose of it in accordance
with local environmental protection regulations.
Insert the new oil lter. When doing so, pay attention to
the “TOP” (2) mark.
Replace the sealing ring (3) in the screw plug.
Apply a small amount of fresh oil to the sealing ring.
Screw in the screw plug.
Fill fresh engine oil into the ller neck.