Weber Genesis II S-310 User Manual

9
Getting Started
Hose Connection &
LeakChecking
Connect the Hose to the GasSupply
A quick-disconnect fitting connects your grill to
the gas supply. Gas will not flow unless the quick-
disconnect is properly engaged.
1) Check that all burner control knobs are in the o
position. Check by pushing in and turning knobs
clockwise (A).
2) Slide the collar of the quick-disconnect back (B).
3) Push male fitting of the hose into the quick-
disconnect and maintain pressure. Slide the collar
closed (C). If it does not engage or lock, repeat
procedure. Proceed to ”CHECKING FOR GAS
LEAKS”.
B
C
A

Weber Genesis II S-310 Specifications

General

Main Burners	3
Total Cooking Area	669 sq in
Primary Cooking Area	513 sq in
Warming Rack Area	156 sq in
Stainless Steel Burners	Yes
Side Tables	2
Dimensions - Lid Closed	47" H x 59" W x 29" D
Grates Material	Porcelain-enameled cast iron
Grill Material	Stainless Steel
Fuel Type	Propane or Natural Gas
BTU Output	39, 000 BTU
Ignition	Electronic Ignition System
Warranty	10 years
Main Burners BTU	39, 000 BTU
Wheels	2