Weber Summit 450 - Ignition System and Reassembly; Crossover Ignition Troubleshooting; Burner Reassembly and Checks

16
REINSTALL CONTROL
PANEL
Front Panel
Control Panel
You will need: control panel.
Pull igniter buttons up until they stay in the up position.
Place the control panel into the grooves on either side of
the front of the cooking box. Push the control panel into
place, using even pressure while pushing.
Front Panel
Control Panel
Use your fingers to lift the front edge of the control panel
slightly and set it into the recess on both sides of the
cooking box.
Summit 450
Summit 650