Weber Summit 450 - Comprehensive Troubleshooting; Flame and Ignition Problem Solving; Operational and Environmental Troubleshooting

17
REINSTALL BURNER
CONTROL KNOBS
You will need: four burner control knobs.
Push on the burner control knobs.
Summit 450
Summit 650
INSTALL TOOL HOLDERS
You will need: four tool holders.
Place the tool holder under the control panel(1) and over
the front panel(2). Set the tool holder on top of the front
panel(2) and slide to the left.
REFER TO OPERATING
GUIDE BEFORE LIGHTING
BARBECUE
Summit 450
Summit 650
(1)
(2)
(1)
(2)