32
MOUNTING THE LP TANK BRACKET
Mount the LP tank bracket to the left-hand side of the enclosure opening
using non corrosive hardware. Mounting holes are provided on the
sides and bottom of your LP tank bracket. Be sure to mount the bracket
securely to the enclosure before use. MOUNTING HARDWARE NOT
INCLUDED.
◆
MOUNTING THE LP HOSE AND REGULATOR
Securely mount the hose and regulator bracket to the top of the built-in
tank enclosure using non-corrosive hardware. MOUNTING HARDWARE
NOT INCLUDED.
◆
LP TANK ENCLOSURE GAS LINE LOCATIONS
Area should be kept clear of sharp, jagged, or extremely abrasive
surfaces to avoid possible damage to gas supply lines. Exercise caution
when pulling gas lines through built-in structure.
◆
BUILT-IN TANK ENCLOSURE ASSEMBLY
3
4
To Next Page
Loading...
