17
English
DISPLAY - AVANTGARDE
ENGLISH
1)
Immerge the ends of the autosteamer into the beverage to be heated;
2) Press the autosteamer key
;
3)
Wait for steam delivery to be completed.
To stop delivery ahead of time, press the selected key again.
i
The system includes a maximum operation time of 4 minutes for the autosteamer.
i
To keep the steam dispensers in perfect working order, it is advisable to carry out a delivery dry run
after each use.
Keep the ends of the autosteamer clean at all times by means of a cloth dampened in lukewarm water.
Use the utmost caution with the autosteamer, as high-temperature steam is present.
i
The autosteamer system makes it possible to make the milk foamy and to bring it up to a programmable temperature.
9.1 Use
autosteamer
65°C
To adjust the activation temperature of the autosteamer, proceed as follows:
• Turn the programming switch (1) to the ON position;
• Hold down the key of the upper left hand push button panel for
at least 5 seconds;
• Repeatedly press the
key until the display shows the message
• Use the keys
to modify the temperature of the autosteamer shown on the display;
• Keep the key pressed to confirm the operation ;
• To exit programming, press the key
(the machine automatically exits programming if no selec-
tions are made for at least 10 seconds) ;
• Upon completion of programming, turn the programming switch (1) back to OFF .
9.2 HEATING TEMPERATURE adjustment
9. A utosteamer
To Next Page
Loading...
Need help?
General
