18
English
DISPLAY - AVANTGARDE
To adjust milk foaming with the autosteamer, proceed as
follows:
• Use a wrench to unscrew component
(A) of the steam
nozzle;
• Use a screwdriver on the screw
(B) located inside the part:
- to reduce foaming turn clockwise
- to increase foaming turn counter-clockwise
9.3 MILK FOAMING adjustment
A
B
To reset the counts see chap 14 - "Data resetting"
i
counters
000000
total coffees
000000
To view the sum of work performed by the machine, proceed as follows:
1)
Turn the programming switch to the OFF position;
2) Keep the key of the left push button panel pressed for at least 5 seconds until
the display shows the total number of selections carried out;
3)
By pressing the keys on the coffee selection push button panel or on the selections push
button panel, it is possible to view the number of selections made with that key;
4)
Press twice the key to exit counts
.
10. Selection count
To activate or deactivate the cup heater, turn the cup heater switch placed above the turn on machine
switch to ON .
11. C up heater
(if it is present)
To Next Page
Loading...
