WEICHAI WD10 Manual

14
● Tool: The special wrench for lter
● Clean the end surrounding of the lter, and remove it
● Install the new oil lter
● Note
：
Adjust the seal ring and smear some lubricating oil on it
while tting the oil lter
．
● Tool: 32 mm open-ended wrench
● Check and clean the screw thread and seal ring, and then install
the whorl plug.
● Fill the clean oil up to the upper limit the capacity of the oil sump is 20 L
．

WEICHAI WD10 Specifications

General

Brand	WEICHAI
Model	WD10
Category	Engine
Language	English