4
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER PRO™
2250 weight system. The weight system offers an
impressive array of weight stations designed to devel-
op every major muscle group of the body. Whether
y
our goal is to tone your body, build dramatic muscle
size and strength, or improve your cardiovascular sys-
tem, the weight system will help you to achieve the
specific results you want.
For your benefit, read this manual carefully before
you use the weight system. If you have questions
after reading this manual, please see the front cover of
this manual. To help us assist you, note the product
model number and serial number before contacting us.
The model number and the location of the serial num-
ber decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the weight sys-
tem at www.weiderservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
ASSEMBLED DIMENSIONS:
Height: 6 ft. 4 in. (193 cm)
Width: 3 ft. 2 in. (97 cm)
Length: 4 ft. 5 in. (135 cm)
Foot Plate
Low Pulley Station
High Pulley Station
Left Side
Right Side
Lat Bar
Leg Lever
Butterfly Arm
Press Arm
Weight Stack
Seat
Backrest
Note: The terms “right side” and “left side”
are determined relative to a person sitting
on the seat; they do not correspond to right
and left on the drawings in the manual.
To Next Page
Loading...
