Weider MAX XP400 - WARNING DECAL PLACEMENT; IMPORTANT PRECAUTIONS

TABLE OF CONTENTS
WARNING DECAL PLACEMENT ............................................................. 2
IMPORTANT PRECAUTIONS ................................................................ 3
BEFORE YOU BEGIN ...................................................................... 4
ASSEMBLY ............................................................................... 5
ADJUSTMENTS .......................................................................... 13
CABLE DIAGRAM ......................................................................... 16
EXERCISE GUIDELINES .................................................................. 17
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL ONE-YEAR WARRANTY ...................................................... Back Cover
Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the center of
this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before begin-
ning assembly,
WARNING DECAL PLACEMENT
The decals shown here have been
placed on the resistance system. If a
decal is missing or illegible, please call
toll-free 1-877-992-5999, Monday
through Friday, 6 a.m. until 6 p.m.
Mountain Time, to order a free replace=
ment decal. Apply the decal in the loca-
tion shown.
hands and
ngers clear of
area.
I isuse of this product may result in serious injury. I
Read user's manual and follow all warnings
and operating instructions prior to use.
Do not allow children on or around machine.
Replace label if damaged, illegible, or removed. J
2