34. Wrap the Military Press Cable (72) arour, :
%t"-Pulley (50). Attach the %'-Pulley to ::he
Top Frame (55) with a 3/8" x 2 1/2" Bolt (86)
and a 3/8" Nylon Locknut (21).
Wrap the Military Press Cable (72) around a 3
1/2" Pulley (15). Attach the Pulley to the indt-
catad bmckat on the Assist .,_rm !'.0,m 'v!th a
3/8" x 1 3/4" Bolt (76) and a 3/8" Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and. Pulley move smoothly.
35. Wrap the Military Press Cable (72) around a
"V"-Putley (50). Attach the _/"-Pulley and a
Long Cable Trap (31) to the Assist Upright
(74) with a 3/8" x 4 112" Bolt (112), a 3/8" Flat
Washer (9), and a 3/8" Nylon Locknut (21).
Be sure that the Long Cable Trap is turned
to hold the Cable in place and that the
Cable is routed around the Pulley as
shown,
Wrap the Military Press Cable (72) around a
3 1/2" Pulley (15). Attach the Pulley to the
other bracket on the Assist Arm (105) with a
3/8" x 1 3/4" Bolt (76) and a 3/8" Nylon
Locknut (21). Be sure that the Cable Is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
34
35
Bracket
105
105
21
16 "
To Next Page
Loading...
