1066540000/00/02.09
27
7.2.4 Specifications
Features
• Configuration and monitoring are performed via FDT/DTM Software ‘WI-Manager’ (process calibration,
signal simulation).
• Inputs for RTD, TC and mA signals, one or two full separated channels with active or passive inputs.
• TC inputs can use either the internal CJC or a terminal with a built-in Pt100 Sensor ACT20X-CJC-HTI
(order No. 116064, channel 1 / order No. 116065, channel 2) for higher accuracy.
• The two-channel version is suitable to use as a signal splitter.
• The device automatically detects whether it is connected to an active or a passive current signal.
• One green and two red front LEDs indicate operation status and malfunction.
• 2.6 kVAC galvanic isolation between input, output and supply
• The device can be mounted in the safe area and in zone 2 / div. 2 and receive signals from zone 0, 1, 2,
20, 21 and 22 / Class I / II / III, Div. 1, Gr. A-G.
To Next Page
Loading...