1066540000/00/02.09
37
7.3.4 Specifications
Features
• Solenoid/alarm driver for the control of solenoids, acoustic alarms and LEDs installed in the hazardous
area
• Two hardware versions make it possible to choose either low (35 mA) or high (50 mA) current output with
1-channel or 2-channel versions
• Configuration via FDT/DTM Software ‘WI-Manager’. Selection of direct or inverted function for each
channel and the possibility of reducing the output current to the hazardous area to suit the application
• The module can be mounted in the safe area and in zone 2/div. 2 and receive signals from zone 0, 1, 20,
21 and 22/Class I/II/III, Div. 1, Gr. A-G
• Extended self diagnostic: Monitoring of error events via the individual status relay
• LED indication: green and 2 yellow/red front LEDs to indicate operation status and malfunction
• 3-way galvanic isolation between input, output and supply, 2.6 kV AC
To Next Page
Loading...