1066540000/00/02.09
17
6. Operation
6.1 Normal Operation
Operators are only allowed to adjust and operate
modules that are safely fixed in panels, etc., thus
avoiding the danger of personal injury and damage.
This means there is no electrical shock hazard and
the module is easily accessible.
6.2 Warm-Up
The product is designed to start-up as soon as
power is supplied. However a warm-up period of
15 minutes is required before it performs to the
specifications above.
When auxiliary power is switched on, for the first
200 ms the product will consume up to 200 mA.
6.3 Cleaning
1 Power supply switched off.
2 Clean with cloth moistened with distilled water.
To Next Page
Loading...