上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
70 Specialized, Concentrated, Focused
8 DXF Support
At present, the system supports Entities as below:
LINE
LWPOLYLINE
ARC
CIRCLE
ELLIPSE
SPLINE
Prompt:
Save the figure drawn with Auto CAD as DXF format, and then perform ―Open and Load‖ and
―Simulation Mode‖ in our system. At this time, the figure shown in the track window is what you have
drawn with Auto CAD.
To Next Page
Loading...