上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
36 / 116
3: bidirectional compensation
3.10.1 Set the Backlash Compensation
In the menu bar, click System > System Parameters. Select Machine Basic Param >
Error Compensation in the left list and set the following parameters:
Backlash(X)
Backlash(Y)
Backlash(W)
3.10.2 Set the Bidirectional Compensation
To set the bidirectional compensation, do the following:
1. In the menu bar, click System > Screw Error Compensation to open the Screw
Error Compensation dialog box:
2. Optional: If X axis and Y axis have not returned to the machine origin, in Home
Behavior area, click X Home and Y Home.
3. Get the actual measurement data of the machine tool:
a. In the Positioning Axis area, select a positioning axis.
b. In the Laser Interferometer area, set related parameters, and click Generate.
The results automatically show in Location Program area.
c. Click Run. The machine tool moves according to the generated positioning
program and the system records position data at the measuring points.
d. Save the data as a RTL or LIN compensation file in the laser interferometer.
4. Close the software, and double-click NcTune.exe in the installation directory
C:\Program Files\Weihong\NcStudio\Bin.
5. Optional: In the menu bar, go to 帮助 > 语言 to switch the software language to
English.
6. To enter Screw Error Compensation page, select Screw Error in the Welcome
interface.
To Next Page
Loading...
