WEIHONG LS1500 - Page 99

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
96 / 116
Parameter description:
o PA1-01
 Name: Control mode selection
 Value: 1
 Description: Velocity control
o PA1-08
 Name: Number of pulse output per turn
 Value: 2500
 Description: Set it to 2500 if the pulse equivalent is 0.001, screw pitch
is 10 mm, and there is no speed reducer. Set it to 1250 if the screw
pitch is 5 mm.
o PA3-31
 Name: Speed command graduation
 Value: 10
 Description: Rated rotational speed for 10V
o PA3-01
 Name: CONT1 signal distribution
 Value: 1
 Description: Servo ON
o PA3-26
 Name: CONT constant validity 1
 Value: 2
 Description: CW rotation command
 Fuji alpha5 plus (Z axis):