23
6
6.11 Set holiday start/end
Why?
When your dwelling is empty while you are on
holiday, your heating system can be operated
on Economy temperature or frost protection
temperature saving energy costs. You will
need to enter the start and end of your holiday.
You will also need to decide whether the
heating should operate only on Economy
temperature, or if it should operate only when
frost protection temperature is not achieved.
If you are a janitor, you can temporarily heat empty
living quarters in Economy temperature mode.
The relevant address of the heating circuit must be
selected.
Note: Each heating circuit has to be set to holiday
mode separately. By switching contact H1- M
the whole system can be reduced.
1:Operator -/+
Holiday
Holiday from
60 --.---
Holiday from
60 --.---
Holiday from
60 17.Sep
Holiday from
60 17.Oct
Holiday to
61 17.Oct
Holiday to
61 --.---
Holiday temp
62 Economy temp
Holiday from
60 --.---
Holiday to
61 17.Oct
Holiday
61 17.Oct
Holiday temp
62 Economy temp
Holiday temp
62 Frost
Cancel holiday program
Set parameter as follows:
–or–
Press
Turn until
display shows
Press to call up the holiday
program
Press to carry out settings
Press to confirm the month
Press to confirm the day
Press to confirm the month
Press to carry out settings
Press to confirm the day
Press to show temperature level
Press to confirm settings
To Next Page
