Weishaupt WRS - Equipment Assignment and Customer Handover

34
9
9.2 Equipment and assignment
9.3 Hand-over to the customer
Your customer service
The customer was informed about the operation of the
system and all documents have been handed over ❑
Date _____________________________
Signature
Heating engineer _____________________________
To be completed by the heating engineer Access via
central operating
Assignment (e.g. ground floor) unit to:
Base module CPU-B1 for heat circuit 1
❑ __________________ ❑
CPU-B2 for heat circuit 1 ❑
CPU-B3 for heat circuit 1 ❑
Extension module EM#2 for heat circuit 2 ❑ __________________ ❑
EM#3 for heat circuit 3 ❑ __________________ ❑
EM#4 for heat circuit 4 ❑ __________________ ❑
EM#5 for heat circuit 5 ❑ __________________ ❑
EM#6 for heat circuit 6 ❑ __________________ ❑
EM#7 for heat circuit 7 ❑ __________________ ❑
EM#8 for heat circuit 8 ❑ __________________ ❑
EM#9 for heat circuit 9 ❑ __________________ ❑
Room influence active ❑ Reference room:
not active ❑ _________________________
External available ❑
temperature sensor
not available ❑
Separate D H W active ❑
program
not active
❑
(i.e. D H W loading
release with pre-set
designation to the selected
heating program)