_______________________________________________________________________________________________________________________________
Merrychef conneX Installation and User Manual
_______________________________________________________________________________________________________________________________
Covers can only be
removed using a tool
▪ Prevents live parts from being
touched accidentally
▪ Prevents access to the moving fan
from the wiring compartment
Check that the covers are in place.
Operating panel can
only be removed
using a tool
Prevents live parts from being
touched accidentally
Ensure that the operating panel is in place.
Protects the user from steam
leaking from the cavity
Check the door seal regularly for signs of
damage and replace it if required.
Protects the user and outside
environment from hot steam and
microwave energy
Check the door regularly for damage and
replace it if required.
Door interlocks:
three switch circuit for
the appliance door
Ensures that the microwave
generation system cannot be
powered when the door is open.
Check door switches:
Action:
Open the appliance door fully during pre-
heat or when the oven is at temperature
Result:
Door open warning message displayed
6
(no picture,
installed by
customer)
▪ Installed by the customer close to
the appliance; easily visible and
accessible, 1- or 3-pole action,
minimum contact separation
3 mm.
▪ Used to disconnect the appliance
from the power supply during
cleaning, repair and servicing work
and in case of danger
Action:
▪ Trip the disconnection device
Prevent faulty components from
drawing too much current and
causing a potential fire hazard.
Ensure that the internal fuses are correctly
rated, actioned by an authorised service
company technician only