Welbilt MERRYCHEF eikon e2s - Page 41

_______________________________________________________________________________________________________________________________
8 cooking procedures
Back to contents >
Merrychef eikon
®
e2s Installation and User Manual
41
_______________________________________________________________________________________________________________________________
How to cook
1.
Select a cooking profile from the cookbook or enter a new cooking profile.
2.
Follow the prompts displayed by the software.
3.
Open the appliance door.
4.
Place the prepared food in the microwave combination oven.
5.
Close the appliance door again.
6.
Start the cooking process.
7.
Wait for the cooking process to finish.
8.
An audible signal is given when the cooking process is finished.
Follow the prompts displayed by the software.
9.
Open the appliance door.
10.
Take out the food.
11.
Close the appliance door again.
Using a cooking profile (Quick serve Mode)
1.
Select the 'all menus' symbol.
2.
Use scroll up/down arrows to find the cooking profile.
NOTE:
If a picture has a red frame around it the cavity temperature is set too
high or too low for that cooking profile.
See ‘Changing the cavity temperature’ on page 48.
Ensure that a food product is placed into the cavity before starting a
cooking profile.
Take all the necessary precautions to ensure that you do not burn
yourself.
Open the appliance door, place the food product into the hot cavity
and close the door.
3.
Select the required cooking profile to start cooking.
Example: 'ITALIAN SUB x 1'.
WARNING:
Hot surfaces at the door and in the cavity