_______________________________________________________________________________________________________________________________
7 Preparing the appliance for use
Merrychef eikon
®
e2s Installation and User Manual
_______________________________________________________________________________________________________________________________
During preheating the display shows the progress as the cavity heats
up to the set temperature.
To stop the cavity heating up touch the red ‘X’ symbol at the bottom
of the screen.
In Quick Service Mode the appliance is ready to use when the
'cookbook' is displayed.
In Full Serve Mode the main menu screen (“chefs’ hat screen”) is
displayed.
Customer guidance and instruction
Instruct the user regarding all safety-related functions and devices.
Instruct the user in how to operate the appliance.
7.3 Main menu screen
Appearance
The buttons and what they do
Development Mode or Manual
Cooking Mode
'Development Mode' enables multistage cooking profiles to be
developed, then stored under a name and symbol for reuse.
‘Manual Mode’ enables multistage cooking without the need for
a pre-programmed cooking profile.
'Press&Go' allows quick access to use the cooking profiles that
are already stored.
'Cookbook' contains the cooking profiles stored in the memory
of the appliance. It displays favourites, cooking profile groups
and a complete listing of all cooking profiles available.
'Cleaning / Temp change' allows the cavity temperature to be
changed and the appliance to be prepared for cleaning with
reminders displayed to assist during the cleaning process.
'Settings' are used to control the appliance settings and
functions including time and language, loading cooking profiles
and for service and maintenance purposes.
To Next Page
Loading...
