Welbilt MERRYCHEF eikon e2s - Using a Cooking Profile

_______________________________________________________________________________________________________________________________
8 cooking procedures
Back to contents >
Merrychef eikon
®
e2s Installation and User Manual
43
_______________________________________________________________________________________________________________________________
Choosing which cooking profiles are shown in the Press&Go menu screen
1.
After selecting ‘Press&Go’ from the main menu screen, select the 'edit
cookbook' symbol.
2.
Two lists are displayed.
The list on the left shows the cooking profiles being part of the
‘Press&Go’ menu.
The list on the right shows other cooking profiles which are available.
Both lists can be scrolled up or down using the blue arrows on the
right of each list.
3.
Select a cooking profile from the list on the left.
Choose whether to change its position within the list or to remove it
into the list on the right.
To change the order of cooking profiles in the left list use the blue
up/down arrows in the middle.
To move a selected cooking profile to, or from, the 'Press&Go' menu
use the green/red arrows in the middle.
4.
To make a cooking profile from the right list available in the
'Press&Go' menu move it into the left list.
5.
Select backspace to return to the 'Press&Go' menu screen when
finished.
8.2.2 Using a cooking profile
Using a cooking profile
1.
Select the 'cookbook' symbol from the main menu screen.
2.
Select a group of cooking profiles, for example ‘ITALIAN SUBS’, to
display the individual cooking profiles.
3.
Select a cooking profile to start, for example ‘ITALIAN SUB x 2’.