Wellion CALLA Light User Manual

21
HYPO AND HYPER WARNING SETTING
Setting Hyper warning after nishing setting up Hypo warning
Step1:
Press button select Hyper set up after exiting Hypo setup.
The hyper icon will ash and the current hyperglycemia war-
ning value status will display on LCD screen.
Step 2:
Press the OK button to enter hyper setup. Press or buttons
to once adjust the values one by one or press and hold or
buttons to advance through
the numbers very quickly. The
Wellion CALLA Light Me-
ter has a settable Hyper
range from 0 to 511mg/dl
(0 to 28,4 mmol/l).
Step 3:
Press the OK button to exit Hyper setup once conrmed.

Wellion CALLA Light Specifications

General

Test Time	5 seconds
Display	LCD
Blood Sample	Capillary Whole Blood
Measurement Range	20 to 600 mg/dL
Sample Size	0.6 µL
Memory Capacity	500 test results
Operating Temperature	10 to 40 °C
Operating Humidity	10 to 85% RH
Automatic Shut Off	After 2 minutes
Battery Type	CR2032
Automatic Coding	Automatic Coding