ATA-171/172/171P/171M (ATA-S1/S2/P/M)
User’s Guide
30
Figure 17. Service Domain Setting
3.11.4 Port Settings: you can setup the SIP and RTP port number in this page. Each ISP provider
will have different SIP/RTPport setting, please refer to the ISP to setup the port number
correctly. When you finished the setting, please click the Submit button. If there is nothing
need to change, please click the Save Change Item in the left side, then click the Save
button. The change you made will save into the system and the system will Reboot
automatically (Note: SIP and RTP Port settings for phone 2 is only supported in ATA172).
To Next Page
Loading...