ATA-171/172/171P/171M (ATA-S1/S2/P/M)
User’s Guide
43
3.14 MAC Clone setting
MAC Clone setting: This function changes the MAC Addresses of workstations in a LAN to which that
are identical to the WAN port; this is done due to the fact that some ISP
companies restrict the use of multiple MAC Addresses through PPPoE.
connect LAN port PC MAC Address to device WAN Port,let your PC MAC address with your device are
same MAC；Because some ISP company should lock (PPPoE) MAC Address。
3.15 System Auth.
3.15.1 In System Authority you can change your login name and password. When you finished the
setting, please click the Submit button. If there is nothing need to change, please click the
Save Change Item in the left side, then click the Save button. The change you made will save
into the system and the system will Reboot automatically.
Figure 30. System Authority
To Next Page
Loading...