To Next PageTo Next PageWhy do sanding grains easily rub off my Wen 6502T belts or discs?
Sanding grains may easily rub off belts or discs if the sanding belt/disc has been stored in the wrong environment. Store sanding accessories away from extremely hot or dry environments. Also, if the sanding belt/disc has been damaged or folded, store sanding accessories flat – not bent or folded.
General| Type | Belt and Disc Sander |
|---|---|
| Dust Collection | Yes |
| Length of Power Cord | 6 ft |
| Weight | 35.5 lbs |
| Disc Size | 6 inches |
| Disc Speed | 3450 RPM |
| Belt Size | 6 x 48 inches |
General advice for keeping the workspace clear and safe.
Precautions related to the electrical cord and grounding.
Guidelines for operator safety, PPE, and body position.
Instructions on how to properly use and maintain the power tool.
Detailed safety rules for belt sander operation.
Explains proper grounding procedures for electrical safety.
Steps for properly installing the sanding belt.
How to adjust the sanding belt for proper tracking.
Technique for surface sanding using the belt.
