To Next PageTo Next Page
Need help?Do you have a question about the Wen 70712 and is the answer not in the manual?
General| Weight | 54 lbs |
|---|---|
| Arbor Size | 5/8 inch |
| Miter Gauge | Included |
| Blade Diameter | 10 inches |
| Motor Power | 15 A |
| Max Rip Capacity | 25 inch |
| Table Size | 20 x 26 inch |
| Bevel Capacity | 45 degrees |
| Max Cut Depth at 90 degrees | 3-1/2 inches |
| Max Cut Depth at 45 degrees | 2-1/2 inches |
| Dust Port | 2-1/2 inches |
General statement about product engineering, safety, and performance expectations.
Provides phone number, email, and website for product questions and technical support.
Details motor, speed, blade size, arbor size, capacity, and included accessories.
Rules covering reading manual, work area, attire, tool checks, and safe operation.
Warning about hazardous dust and recommendation for ventilation and dust collection.
Rules on tool usage, maintenance, checking for damage, and workshop safety.
Rules specific to miter saw operation, including guards, material type, and blade usage.
Procedures for compound cuts, handling material, avoiding hazards, and dust collection.
Explanation of double insulation, user protection, and servicing requirements for electrical safety.
Recommendations for selecting and using appropriate gauge extension cords for the tool.
Advice on using separate circuits, proper connection, and general operating safety.
Identifies key parts of the miter saw via a labeled diagram.
Instructions for safely removing the saw from its packaging and preparing it for use.
Guidelines for safely transporting the saw and securely mounting it to a workbench.
Explains the function of release, slide lock, and miter table locks for secure operation.
Instructions for setting the bevel angle and attaching the hold-down clamp assembly.
Details on spindle lock button, blade guard, dust bag, and support arms.
Simple instructions for operating the power switch.
Step-by-step guide to ensure the blade is perpendicular to the table for accurate cuts.
Procedure to align the fence accurately with the saw blade for precise cuts.
Detailed, safety-conscious steps for removing the old blade and installing a new one.
How to perform standard crosscuts on narrower workpieces using the saw's fixed position.
Guidance on supporting long workpieces and using the clamp assembly for secure cuts.
Instructions for making wider cuts using the saw's sliding mechanism.
Steps to set the saw for angled cuts (bevels) and perform them safely.
Guide to making cuts that involve both miter and bevel angles simultaneously.
Emphasizes safety before performing any maintenance and the need for qualified personnel.
Instructions for keeping the tool clean, maintaining moving parts, and recommended cleaning agents.
Visual representation of all components of the miter saw with numerical identifiers.
A detailed list of all parts, their stock numbers, descriptions, and quantities.
Continues the detailed list of parts, stock numbers, descriptions, and quantities.
Outlines the warranty period, exclusions, remedies, and limitations for the product.
