INTRODUCTION
Thanks for purchasing the WEN Metal Band Saw. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not
substitutes for proper accident prevention measures.
SPECIFICATIONS
Model Number BA4555
Motor 120V, 60 Hz, 4.5A
Saw Blade 56-1/2 in. x 1/2 in. x 0.025 in, 8/12 TPI, Bimetal
Cutting Capacity for Square Material
At 45°: 3-1/8 in. x 3-15/16 in.
At 90°: 5 in. x 4-7/8 in.
Cutting Capacity for Circular Material
At 45°: 3-1/8 in. Diameter
At 90°: 5 in. Diameter
Miter Cut Range 0° - 60°
Blade Speed 125 to 260 FPM
Product Weight 45 Pounds
Product Dimensions 14 in. x 27 in. x 15.5 in.
3
To Next Page
Loading...
