UNPACKING & ASSEMBLY
No. Accessory Qty.
43 Foot Support Assembly 2
44 Foot Support Isolator 2
32 M6X40 Bolt 4
45 M6 Nut 6
42 Wheel 2
48 Wheel Axle 2
16 Flat Washer 2
25 Cotter Pin 2
19 Handle 1
PACKING LIST
UNPACKING THE GENERATOR AND ACCESSORIES
Open the packaging and take out all loose parts from the box. With the help of a good friend or trustworthy foe,
carefully lift the generator from the packaging and place it on a sturdy, level surface.
Make sure all the accessories are accounted for and fully assemble the generator before discarding the packaging.
If any part is missing or broken, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us
at techsupport@wenproducts.com.
10
IMPORTANT: Two red shipping brackets have been added to
the bottom of your generator to protect the generator during
shipping. Please make sure to remove BOTH shipping brack-
ets before operation.
IMPORTANT: The LPG hose is packed underneath the fuel
tank, sitting above the engine. Remove to hose and set it aside
before assembling or operating the generator.
No. Accessory Qty.
49 Handle Connector 1
31 M8X35 Bolt 2
64 M8 Hex Nut 8
59 Handle Bolt 1
30 Handle Fixing Clip 1
15 M6X55 Bolt 1
N/A Spark Plug Wrench 1
N/A First Stage Regulator 1
N/A Oil Bottle 1
To Next Page
Loading...
Need help?
General
