11
KNOW YOUR INVERTER GENERATOR
CONTROL PANEL
1. Voltage Selector
Sets the generator’s output voltage to 120V or 240V. When the
switch is set to 120V, the 120V outlets are active; when the switch
is set to 240V, the L14-30R and parallel outlets are active.
2. AC Circuit Breaker (30A)
Press to reset the NEMA TT-30R RV recepticle.
3. AC Circuit Breaker (20A)
Press to reset the NEMA 5-20R recepticles.
4. DC Circuit Breaker (8A)
Press to reset the USB and 12V recepticles.
5. CO WATCHDOG Carbon Monoxide Monitor
Measures the accumulation of poisonous CO gas while the genera-
tor is running. If the level of CO gas gets too high, the CO Watchdog
system will automatically shut down the generator. See p. 26 for
more information.
6. Data Meter with Indicator Light
Displays load level (left), fuel level (right), voltage (e.g. V120), fre-
quency (e.g. F60.0), session runtime (e.g. A 0.0), and total runtime
(e.g. 0.0). Press MODE to switch between displays.
7. Reset Button
Press to reset the circuit in case of overload.
8. Engine Start Button
Press to start the generator.
9. Eco-Mode Switch
Maximizes fuel economy & run time.
10. 12V DC Outlet
Cigarette-style outlet provides DC power.
11. 5V USB Port
1A & 2.1A for charging various electronic devices.
12. Grounding Nut
Ground the generator to reduce the risk of electric shock.
13. AC 120V NEMA 5-20R Duplex Receptacles
Standard household outlets provide 120V 60Hz power.
14. AC 120V NEMA TT-30R RV Receptacle
Standard RV connector.
15. Parallel Connection
Connect to share wattage between inverter generators. 240V ONLY.
16. AC 120/240V 30A NEMA L14-30R Receptacle
Connect electrical devices that run on 120V/240V, 60 Hz, single
phase, AC current.
8
2 3 4 5 76
1
910111213141516
To Next Page
Loading...
