Wen MM1011 User Manual

10" SINGLE-BEVEL SLIDING
COMPOUND MITER SAW
Instruction Manual
MODEL MM1011
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM
1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM

Wen MM1011 Specifications

General

Type	Miter Saw
Max Cutting Width	12 inches
No-Load Speed	4500 RPM
Blade Diameter	10 inches
Max Cutting Depth at 90 degrees	3.5 inches
Arbor Size	5/8 inch
Max Cutting Depth at 45°	2.5 inches
Motor Power	15 Amps