WerkMaster TITAN XT - Viewing Total Time Energized

OPERATOR’S!MANUAL!!
+,-.!/?!!
!
!
!
To bypass the access code screen and enter the programming menu, press the
ENTER button. Any attempt to enter an access code will be ignored by the VFD
!
!
!
!
!
!
!
!
!
!
!
After the access code screen, the following screen will appear>!!
!
!
!
!
!
!
The number 201 has a “V” before it. All parameter numbers that have a V before
them can only be viewed. Any number with a “P” before it can be changed. If you
notice a parameter with a P before it, contact customer service as this is a fault
that may cause problems.
Using the arrow button, scroll down until you reach parameter 109. This
parameter displays the total time the machine has been in plugged in. You
cannot reset this parameter.
!
!
!
!
!
!
Viewing the Total Time
Energized
! ! ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!NOTE!