OPERATOR’S!MANUAL!!
+,-.!Y!!
COLOSSOS XT (230V / 460V)
!
• Largest model in the WerkMaster family of machines, designed to exceed the
needs of the professional commercial, residential, and maintenance
contractors
• Available in 230V, 380V/460V and 460V models
• 7 Machines in 1 – grinds, sands, strips, polishes, buffs, burnishes, and edges
• Removes thinset, epoxy, glue, paint, mastic, and micro toppings; works on
spalled or rained out concrete.
• Allows you to easily flatten a floor or follow a wavy floor with the same tool, so
you can polish from cream to exposed aggregate
• Delivers deep, crisp, clear mirror finishes on concrete and terrazzo
• Runs wet or dry on concrete, stone and terrazzo
• Features WerkMaster Octi-DiscTM Technology with 8 counter rotating heads
and the versatility of using our 8” (203 mm) ULTRA-FLEX Plug ‘N Go tooling
system
• Edges to within 1/8” (3 mm) of the wall.
• Easy to use and operator friendly, the COLOSSOS XT weighs only 800 lbs
(364 kg), has a 24” (61 cm) footprint has an auto sensing dual voltage (230V
and 460V) 3 phase variable frequency drive with a disc rotation speed range
of 450 –1800 RPM. 380V models are NOT dual voltage
• The dual action wet/dry vacuum port allows for dry, dust-free pick up and can
be used with our optional water feature.
• Has EZ Bak tilt and an adjustable, foldable handle for easy transport.
SPECIFICATIONS
!
!
To Next Page
Loading...