WerkMaster TITAN XT - Machine Descriptions; WerkMaster Titan XT Machine Description

OPERATOR’S!MANUAL!!
+,-.!X!!
INTRODUCTION
Congratulations on your purchase of a WerkMaster machine. WerkMaster
machines allow professional surface prep, polishing, grinding, edging, buffing
and restoration of virtually any surface material, including concrete, terrazzo,
stone, and hardwood. This manual is provided to assist you in the operation and
maintenance of your WerkMaster machine.
!
!
!
MACHINE DESCRIPTIONS
WerkMaster machines include the Scarab, Termite, Viper XT, Raptor XT, TITAN
XT, COLOSSOS XT models. To see the complete family of WerkMaster
machines visit our website at www.werkmaster.com.
TITAN XT (230V / 380V / 460V)
• Most aggressive surface prep machine in its class, designed to exceed the
needs of the professional commercial, residential, and maintenance
contractor
• 7 Machines in 1 – grinds, sands, strips, polishes, buffs, burnishes, and edges
• Removes thinset, epoxy, glue, paint, mastic, and micro toppings; works on
spalled or rained out concrete
• Allows you to easily flatten a floor or follow a wavy floor with the same tool so
you can polish from cream to exposed aggregate
• Delivers deep, crisp, clear mirror finishes on concrete, marble, stone, granite
and terrazzo
• Runs wet or dry on concrete, stone, and terrazzo
• Features WerkMaster Octi-DiscTM Technology with 8 counter rotating heads
and the versatility of using our 6 ¾” (171 mm) ULTRA-FLEX Plug ‘N Go
tooling system
• Edges to within 1/8” (3 mm) of the wall
• Easy to use and operator friendly, the TITAN XT weighs only 600 lbs (273
kg), has a 20” (51 cm) footprint with a disc rotation speed range of 450 –
1800 RPM
• Runs on both single-phase 220V or three-phase 230V
• 380V / 460V runs in three-phase only in 380V or 460V mode
• The dual action wet/dry vacuum port allows for dry, dust-free pick up and can
be used with our optional water feature
• Has EZ Bak tilt and an adjustable, foldable handle for easy transport
!
!
!
!
!
!
!
!