To Next PageTo Next Page
Why does my Weslo Cadence 21.5 Treadmill turn off during use?
If the Weslo Treadmill's power switch has tripped, wait five minutes, and then press the switch back in. Also, make sure the power cord is plugged in correctly and that the key is properly inserted into the console. If the treadmill still won’t run, please see the front cover of this manual.
How to fix Weslo Cadence 21.5 Treadmill walking belt slipping?
To fix a walking belt that slips on your Weslo Treadmill, first remove the key and unplug the power cord. Then, use the hex key to turn both idler roller bolts clockwise, 1/4 of a turn. Make sure you can lift each edge of the walking belt 2 to 3 inches off the platform when it's correctly tightened and keep the walking belt centered. Plug the power cord back in, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
What to do if Weslo Treadmill walking belt is off-center?
First, remove the key and unplug the Weslo Treadmill. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn. If it has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Avoid overtightening. Plug the power cord back in, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.
How to recalibrate incline on Weslo Cadence 21.5?
With the key in the console, press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The Weslo Treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.
General| Running Area | 16" x 50" |
|---|---|
| Display | LCD |
| Speed Range | 0-10 mph |
| Speed | 0-10 mph |
| Programs | 6 |
| Incline | 2-Position Adjustable Incline |
