INSTALLATION AND OPERATION MANUAL
Whale® Bilge IC Waste Pump Range
Thank you for purchasing this Whale® product.
For over 40 years, Whale® has led the way in the design and manufacture of
freshwater and waste systems including: pumps, plumbing, faucets and showers for
low voltage applications. The company and its products have built a reputation for
quality, reliability and innovation backed up by excellent customer service.
For information on our full range of products visit www.whalepumps.com
This Gulper® IC is a high capacity waste pump with intelligent control electronics
inside designed to be installed in recreational marine vessels as a remote mounted
bilge pump - Suitable as a primary bilge pump for boats up to 12 metres / 39.4 ft
(designed to ISO15083), or as a secondary bilge pump on any vessel.
Fig 1 - Typical
Installation Gulper®
IC as a Remote
Mounted Bilge
Pump
INSTALLATION & USER INSTRUCTIONS
1. TYPICAL INSTALLATION
Gulper IC
Remote Mounted bilge pump
with integrated intelligent
control.
Strainer IC
3/4” strainer
with integrated
intelligent
control
Model Number Description
BP2083B Gulper IC - 12 V d.c.
BP2085B Gulper IC - 24 V d.c.
SI8284 Retail Bilge IC - Remote Mounted Bilge Kit 12 V d.c.
SI8484 Retail Bilge IC - Remote Mounted Bilge Kit 24 V d.c.
SI8222B Bulk Strainer IC and Gulper® IC- 12 V d.c with 2m (6ft) cable
SI8224B Bulk Strainer IC and Gulper® IC- 12 V d.c with 4m (12ft) cable
SI8422B Bulk Strainer IC and Gulper® IC- 24 V d.c with 2m (6ft) cable
SI8424B Bulk Strainer IC and Gulper® IC- 24 V d.c with 4m (12ft) cable
ENG
To Next Page
Loading...
Need help?
General
