Whale INSTANT MATCH SDS263T User Manual

• Connect mains wire to a 5A fused spur.
• The transformer is factory set as shown to the right on
the jumper settings for Bluetooth
®
wireless technology
1
0 seconds overrun and 15mm inlet pipe size.
For other settings please refer to Transformer settings
(see page 11).
• Refit the hatch and tighten the screws to make
the transformer water resistant.
5. Wiring your transformer
• The blue LED flashes every 10 seconds indicating
that power is on.
• The green LED flashes when water is flowing
through the shower.
• When the test button is depressed the buzzer beeps.
6. The Whale Instant Match
®
with Bluetooth
®
wireless technology transformer includes
Activelink diagnostics to aid installation:
On the transformer are two indicator LEDs
WITH
10
181.604 (IMATCH).qxp_Layout 1 14/10/2019 11:24 Page 10

Whale INSTANT MATCH SDS263T Specifications

General

Brand	Whale
Model	INSTANT MATCH SDS263T
Category	Plumbing Product
Language	English