To Next PageTo Next Page
Need help?Do you have a question about the Whale INSTANT MATCH SDS263T and is the answer not in the manual?
General| Brand | Whale |
|---|---|
| Model | INSTANT MATCH SDS263T |
| Category | Plumbing Product |
| Language | English |
Troubleshooting steps and guidance for end users.
Specific instructions for installing the wet floor gulley.
Specific instructions for installing the tray gulley.
Guidance on connecting the pump to a macerator.
Instructions for connecting the drainage pipe.
Advice on selecting the optimal location for the pump.
How to securely mount the pump backplate to the wall.
Details on making the pipework connections to the pump.
Connecting the mains power to the transformer.
Explanation of indicator LEDs and diagnostic features.
Instructions for fitting and securing the pump cover.
Information on installing an optional external pump switch.
How to configure the transformer settings for different sensors and pipe sizes.
Key details regarding Bluetooth compatibility and placement.
Configuring shower settings for Bluetooth operation.
Steps to set up the transformer for Bluetooth pairing.
How to turn on the shower to complete the pairing process.
Initial step to switch off the mains power supply.
Observing the transformer light after power cycle.
Final steps to complete the unpairing process.
Specific steps for unpairing the Mira Advance shower.
Isolating power and adjusting DIP switches for unpairing.
Turning the shower power on to complete the cycle.
Configuring the transformer for a hardwired connection.
Adjusting shower settings for hardwired operation.
Wiring the signal cable from transformer to shower.
Compatibility guide for older Whale transformers.
How to test the pump's suction capability.
Method for clearing blockages in pipework.
Testing external pipework for issues.
Procedure to check for air leaks in the system.
Method for measuring shower flow rate.
Inspecting and replacing the tricuspid valve.
Inspecting the pump head for debris and diaphragm seating.
Steps to diagnose why the pump fails to start.
Steps to diagnose why the pump continues to run.
Diagnosing issues with hardwired connections.
Diagnosing issues with Bluetooth connectivity.
Troubleshooting for when the pump runs but doesn't pump effectively.
