Page 4-6
GLO-BAR IGNITION
The
Glo-Bar Ignition System
(see Figure 4-10) is a 120-volt electrical system that consists of
three important components. The three components, a thermostat that is controlled by the
customer, an ignitor and a safety valve, both located inside the oven, create a very efficient system
that is safe and dependable. Unlike the mechanical system that works with a sensor and capillary
tube to operate the safety valve, this system operates entirely on an electrical system requiring 120-
volts AC (alternating current).
Oven
Thermostat
Oven
Burner
Sensing Bulb &
Capillary Tube
Main Gas
Inlet
Glo-Bar
Ignitor
Safety
Valve
Manual
Gas Shutoff
Valve
Pressure
Regulator
120-Volt
Supply
Figure 4-10
Thermostat
Switch Contacts
Safety Valve
Oven Ignitor
NL1
To Next Page
Loading...
