Whirlpool AWD60A - Control Panel; Control Panel Components; Setting Program Times

!0ROGRAMKNOB
Turn this knob to choose the drying program you desire. This dryer has 7 program options
available for you to choose.
"3TART0AUSEBUTTON
After turning on the power, select the drying program you desire.
Gently touch Start/Pause button to start the dryer. To Pause a program gently touch this button
DURINGTHEOPERATIONOFTHEDRYER4HEDISPLAYSCREENWILLmASHANDTHEMACHINEWILLBEHALTED
Press the Start/Pause button again and the program will continue to operate. Also used to set up
the time of the set program.
#,%$SCREEN
This screen displays the remaining time for a program and the delay time.
$$ELAYBUTTON
You may choose to start the dryer after a preset time. The delay range is between 1 and 12
hours. Gently touch the delay button before a program starts, each touch of will add one hour.
When in excess of 12 hours, the remaining time will be re-displayed. After a delay time is set,
TOUCHTHE3TART0AUSEBUTTONTOTHESTARTTHEDELAYOPERATIONANDTHEINDICATORLIGHTWILLmASH
Also used to set up the time of the set program.
SET PROGRAM
s7HENTHE3ET0ROGRAMISSELECTEDTHEDEFAULTLEFTTIMEWILLBEATTHISTIMETHE,%$DISPLAY
ISmASHING
s/NCETHE$ELAYTIMERBUTTONISPRESSEDTHE3ETTIMEWILLINCREASEBYMINUTESUNTIL)F
the delay timer button is pressed again, it will be ineffective.
s/NCETHE3TART0AUSEBUTTONISPRESSEDTHETIMEWILLREDUCEBYMINUTESUNTIL)FTHE
start/pause button is pressed again, it will be ineffective.
s/NCETHEPROGRAMTIMEISSETANDTHEREARENONEWADJUSTMENTSDURINGTHESECONDSSHOWN
BY,%$DISPLAYmASHINGlVETIMESITINDICATESTHATTHEDRYINGTIMEHASBEENSET!TTHISTIMEIF
you press the Start/Pause button, the program will run as the set time requires.
CONTROL PANEL
12
TumbleDryer_AWD60A-4.indd 12 5/8/08 4:26:02 PM