Whirlpool SS209 - Problem Solving; Troubleshooting

PROBLEM SOLVING
Normal conditions
The compressor is set to continue running for at least three minutes after the unit
switches off so as to ensure the next use is smooth. Therefore ensure the power
is left on during this time. This action also extends the working life of the unit.
Troubleshooting
А: Before phoning for service please check the following:
1. If the unit fails to operate:
о Is 'FULL' ж flashing? Is the bucket in a stable location? Check and reposition.
© |s the unit plugged іп?
о [в it switched on?
° [s the unit defrostina ('Defrost' Ұ-Павһіпа)?
2. If performance is inefficient:
ә Check if the filter is dirty and clean it.
> Check that air intake and outlet are uncovered.
s [n case of low ambient temperature and humidity the unit defrosts often.
3. If noise is heard:
ә [в the unit on a horizontal surface? Check and томе if necessary.
» Check if the filter is dirty and clean it.
B. If the problem persists (for example indicator lights flashing on the panel
prevent operation and indicate the appliance has identified a fault), unplug the
unit and contact tha manufacturer.
C. Do not attempt to carry out repairs by yourself.
D. Do not operate the unit if the cable or plug is damaged, but take it to a qualified
technician. Unauthorised repairs may damage the unit or cause Injury to persons
and damage to property, and the guarantee is invalidated.
After-sales service center
Consumer Appliances Service Limited
14/FL. Wilson Logistics Centre, 24-28 Kung Yip St, Kwai Chung, N.T. Hong Kong.
Star Hotline: 24069138
«5еа,тпи