Whirlpool SS209 - Function Keys; Status Indicators

кее из єз өө ба тз кә © © @ ОФ ©
HOW ТО ОРЕНАТЕ
1. Plug inita the mains. Press ON/OFF key to start
2 Press FUNCTION key (io acfivate fetibus (uU .
3, Press SWING key @to illuminate swing indicator lights D 0
(Bin arder; press again ta step swing.
4. Press HUMIDITY key (sb lo set target humidity with Indicators
Фр. Only operates in dəhumidifiar function.
5. Press TIMER key (Жі illurrinale indicators (ВІ ` F
these lights do not illuminate, continuous dahumidifying is
in progress,
6. Press ON/OFF key адап іс switch off (unplug the unit if it
lg nat to ре used Tor some times).
Мой: The compressor rs programmed Гог probclion, so i wil
not restart within 3 minutes af stopping.
Function keys
KOONOFF key — (S)FUNCTION у (@ SWING key
(BHUMIDITY key (3 TIMER key
STATUS Indicators
- ) «5055: грот humidity is generally below 5096.
Q Ө 50-50%: room humidity is generally 50-60%.
& »8055: roam humidity is generally above 60%.
* : Павһев when defrosting, returns automatically to dehumidifer.
ләй" flashes when bucket is full or wrongly positioned: please empty оғ repcsition.
à : the unit is filtering with no dehumidifier. Ipnizer ia оп.
=> 1 the unit is producing heated air for rapid drying ef laundry. lonizer is on.
4 : flashes when dehumidifier is on. lonizer is on.
$^ ' the louver swings upwards to about 80”.
= t the louver swings forwards ta about 607.
: the louver swings in wide range to about 140".
40-50%; the unit stops automatically when humidity reaches 40-50%,
50-6050 the unit stops automatically when humidity reaches 50-8.
60-7094: the unit stops automatically when humidity reaches 60-7054.
12 hours: the unit steps autornatically after 12 hours.
8 hours: the unit stops automatically after 8 hours.
4 hours: the unit stops automatically after 4 hours.
2 hours: the unit staps autnmatieally after 2 hours.