White Rodgers UP310 - Fan Operation; Check Thermostat Operation

22
5.1 Fan operation
If your system does nothaveaGterminalconnection,skipto5.2 Heating system.
1. PressthefanbuttontoselecttheON position. The blower should begin to operate.
2. PressthefanbuttontoselecttheAUTO position. The blower should stop immediately.
Tip:Ifatanytimeduringtestingyoursystemdoesnotoperateproperly,pleasecontactCustomerSupportat
877.654.9394oremailwr.techsupport@emerson.com
4.6 Turn on power
Turn on your power at the source.
Congratulations!You’vecompletedthethermostatinstallationprocess.
5. CHECK THERMOSTAT OPERATION