White Rodgers UP310 - Getting Started with Your Thermostat; Preparations and Tools

3
1. PREPARATIONS
Precautions
• Donotexceedthespecicationratings.
• All wiring must conform to local and national electrical codes and ordinances.
1.1 Check package contents
This package should contain the following items:
1.2 Gather tools
• Thermostat
• Mounting screws and wall anchors (x2)
• 2 AA batteries
• Terminal wire label stickers
• Installation instructions
Required tools:
□SmallPhillipsorFlat-headscrewdriver
□Smallpliers(needle-nose)
□Drillwith3/16”(4mm)bit
Optional tools:
□Wirecutters/stripper
□Hammer(forwallanchors)