White Rodgers UP310 - Heating System

23
5.2 Heating system
1. PresstheSystem button to select the Heat position.
2. Press toadjustthermostatsettingto1°aboveroomtemperature.Theheatingsystemshouldbeginto
operate and the thermostat will indicate Heat On.
3. Forheatpumpwithauxiliary-Press toadjustthermostatsettingto3°aboveroomtemperature.Theauxiliary
heat should begin to operate and the thermostat will indicate Heat On Auxiliary.
4. Press to adjust thermostat setting below room temperature. The heating system should stop operating and
the Heat On icon will disappear.
5.3 Auxiliary only mode (heat pump systems)
1. PressthesystembuttontoselecttheAux position. This bypasses the heat pump and runs auxiliary heat only.
2. Press toadjustthermostatsettingtoaboveroomtemperature.Theauxiliaryheatingsystemshouldbeginto
operate and the thermostat will indicate Heat On Aux.
3. Press to adjust thermostat setting below room temperature. The auxiliary heating system should stop operat-
ing and the Heat On Aux icon will disappear.