EasyManua.ls Logo

Whynter ARC-13W/S - User Manual

Whynter ARC-13W/S
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WHYNTER SNO PORTABLE AIR CONDITIONER
MODEL# : ARC-13W/S

Table of Contents

Questions and Answers

  • L
    Lori LopezJul 31, 2025
    Why Whynter Air Conditioner turns on but is not cooling?
    • S
      Stephanie WilsonJul 31, 2025
      If your Whynter Air Conditioner turns on but isn't cooling, it could be due to a few reasons: * The room temperature might be outside the unit's operational range of 64°F to 100°F. * Ensure the Cooling icon is selected on the remote by pressing the Function Mode button. A beep should confirm the signal reception. * Allow the compressor 3 minutes to activate after selecting Cooling mode. * Try setting the air conditioner to a lower temperature. * Also, the internal water reservoir might be full; drain it manually or let the unit exhaust the water itself to resume cooling.
  • J
    Jason SmithAug 5, 2025
    How to fix weak airflow from Whynter Air Conditioner?
    • E
      Eric NguyenAug 5, 2025
      If the air from your Whynter Air Conditioner isn't cold or the airflow is weak, try these steps: * Clean the filters, as they may be dirty or obstructed. * Ensure the air intake has at least 20" of clearance. * Make sure the exhaust hose is as short as possible.
  • J
    Jeffrey CunninghamAug 10, 2025
    What to do if Whynter ARC-13W/S Air Conditioner is not cooling room enough?
    • J
      Joshua GillespieAug 10, 2025
      If your Whynter Air Conditioner isn't cooling the room enough, consider these factors: * Ensure all windows and doors are closed to the room being cooled. * Close curtains and blinds to minimize direct sunlight. You may need additional cooling or another air conditioner.
  • J
    Jennifer JacksonAug 14, 2025
    What to do if my Whynter ARC-13W/S does not turn on?
    • L
      Lauren ManningAug 15, 2025
      If your Whynter Air Conditioner doesn't turn on, there might be a few reasons: * Check for a power failure and restore the power supply. * See if the automatic switch, line fuse, or breaker has been tripped; flip the switch, change the fuse, or turn the breaker back on. * Too many appliances may be drawing power on one circuit, so move some appliances to another circuit. * The unit may be on a circuit with the incorrect voltage, so move the unit onto another circuit with the correct voltage. * Press the Reset button on the LCDI plug. * If none of these work, call for service, as only authorized personnel should replace a damaged power cord or plug.
  • A
    Alexander SinghAug 19, 2025
    Why Whynter Air Conditioner is leaking water?
    • S
      Steven NashAug 20, 2025
      If your Whynter Air Conditioner is leaking water, it might be because: * The unit is tilted or not level; make sure it is level. * The water tank is full; drain it from the drain plug at the back of the unit.
  • R
    Robert MarshallAug 25, 2025
    How to reduce noise from Whynter ARC-13W/S Air Conditioner?
    • J
      Jason WhiteAug 25, 2025
      If your Whynter Air Conditioner is very noisy: * Make sure the unit is level. * Move it to a location with a level and hard floor if the surface underneath is uneven.

Summary

Disposal

Parts Overview

Safety Precautions

Installation

Exhaust Hose Installation

How to properly connect and position the exhaust hose for effective cooling.

Window Installation

Guide for installing the unit through a window or sliding door using the provided kit.

Wall Installation

Instructions for creating a wall opening for the exhaust hose installation.

Control Panel Overview

Operations

Switching On;Off and Comfort Mode

How to turn the unit on/off and activate the automatic comfort temperature setting.

Night Comfort Mode Operation

Using the night comfort function for energy saving and reduced noise during sleep.

Cooling, Dehumidifying, and Fan Modes

How to select and operate the unit in cooling, dehumidifying, or fan-only modes.

Fan Only Mode Operation

Details on using the fan-only mode for air circulation without cooling.

Fan Speed Control

Setting Program Modes and Time

Setting Current Time

Step-by-step guide to setting the correct time on the remote control display.

Setting Program Start and Stop Times

Programming the 1st and 2nd function programs with specific start and stop times.

Enabling and Disabling Program Functions

Activating or deactivating the programmed timer functions for the air conditioner.

Resetting Remote Control Functions

Airflow Direction and Remote-less Operation

Operation Without Remote Control

Instructions for managing the air conditioner when the remote control is lost or malfunctioning.

Transportation Guidelines

Maintenance Overview

Cleaning the Air Filter

Step-by-step guide to cleaning the air intake filters for optimal performance.

Cleaning the Air Conditioner Body

How to clean the exterior of the air conditioner unit.

End of Season Storage

Preparing the air conditioner for storage at the end of the cooling season.

Troubleshooting Common Problems

Unit Not Cooling Properly

Diagnosing and resolving issues when the unit is not cooling effectively.

Unit Noise and Water Leaks

Addressing problems related to excessive noise and water leakage from the unit.

Technical Specifications

Warranty Information

Whynter ARC-13W/S Specifications

General IconGeneral
Typeportable
Colorfrost white, white
Operating Area Size420 square feet
Cooling Settings1
Heaterno
Fan Airflow Rate224 cubic feet per minute
Hosesingle
Remote Controlyes
Timeryes
Sleeping Modeno
Current10.5 amperes

Related product manuals