Page 3 2010 Edition 1
Table of Contents
1.0 Introduction
2.0 Geometry:
2.1 146
2.2 T-120
2.3 E-120 (with 120 fork)
2.4 E-120 (with 130 fork)
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Getta-Grip Seat Clamp
3.3 Set up of Fork
3.4 Set up of Rear Damper
4.0 Safety.
5.0 Lubrication:
5.1 Getta-Grip Seat Clamp
5.2 General Lubrication
6.0 Servicing the Rear Suspension:
6.1 Removing the Rear Shock and Swinging Arm
6.1.1 From E-120 or T-120
6.1.2 From 146
6.2 Stripping and Re-assembling Front and Rear Quad-Links
6.2.1 From E-120 or T-120
6.2.2 From 146
6.2.3 Extraction of KP Bearings
6.2.4 Insertion of KP Bearings
6.2.5 Re-Assembly of Quad-Links
6.3 Re-assembling the Rear Suspension
6.3.1 Correct Orientation of Front and Rear Quad-Links
6.3.2 Re-Assembly of Rear Suspension (E-120 or T-120)
6.3.3 Re-Assembly of Rear Suspension (146)
7.0 Servicing Whyte Modular Dropout Systems:
7.1 Disassembly of Rear Modular Dropout
7.1.1 From E-120
7.1.2 From T-120 or 146
7.2 Reassembly of Rear Modular Dropout
7.2.1 To E-120
7.2.2 To T-120 or 146
8.0 Torque Settings.
9.0 Notes
To Next Page
Loading...
