WI-PMS310GF-Alien-I QSG Page 10 of 21
4. Enter the login credentials.
The default credentials are:
Username: admin
Password: admin
8.1.2. Command Line Interface
For full details, download these documents:
• https://ubwh.com.au/documents/WI-TEK_CLI.pdf
• https://ubwh.com.au/documents/WI-TEK_CLI_POE.pdf
(additional CLI commands for POE switches)
See an example session below, with many lines deleted for clarity.
Username:admin
Password:admin
Switch>?
Exec commands:
show Show running system information
Switch>show ?
ip Internet Protocol (IP)
Switch>show ip ?
interface IP interface status and configuration
Switch>show ip interface brief
Interface IP-Address Status Protocol
ge1/1 unassigned up down
To Next Page
Loading...
