Need help?Do you have a question about the Wi-Tek WI-PMS310GF-Alien-I and is the answer not in the manual?
Explains the status of system power and ring LEDs.
Describes the link and PoE status indicators for the RJ45 Ethernet ports.
Explains the link status indicators for the SFP ports.
Details the different DC power input options and their voltage/current specifications.
Explains the functionality of alarm inputs and the TMS sensor connection.
Covers the reset procedure for factory defaults and other miscellaneous functions.
Outlines the two primary methods for accessing the switch's configuration interface.
Provides instructions for accessing and using the switch's web-based graphical interface.
Details how to connect to and use the switch's command-line interface for configuration.
Explains the procedure for saving current configuration settings to ensure persistence.
Guides on configuring the switch to obtain network settings automatically via DHCP.
Details how to enable and configure the SNTP client for time synchronization.
Introduces the Authentication, Authorization, and Accounting (AAA) features.
Explains how to configure TACACS+ for external authentication of management logins.
Describes setting up 802.1x for external authentication of network access for connected devices.
Covers the configuration and use of Simple Network Management Protocol (SNMP) for monitoring.
Details how to configure the Fast Ring technology for high availability and fast recovery.
Step-by-step guide to updating the switch firmware using the graphical user interface.
References the procedure for updating firmware using the TFTP protocol.
General| Model | WI-PMS310GF-Alien-I |
|---|---|
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 130W |
| Switching Capacity | 20Gbps |
| Forwarding Rate | 14.88Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9K |
| Power Input | 100-240V AC, 50/60Hz |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Power over Ethernet (PoE) | Yes |
| Type | Switch |
| Power Consumption | ≤150W |
| Operating Temperature | 0°C to 45°C |
| Layer | Layer 2 |
| Ports | 8x Gigabit PoE+ Ports, 2x Gigabit SFP Slots |
To Next Page
